Gantry Cranes

Gantry cranes or Goliath Cranes are very versatile cranes used typically for activities in steel warehouse, precast yards, construction sites and other outdoor applications. Gantry cranes move on rails supported on floor level instead of rails placed at elevated level as in case of overhead cranes. They are also the right material handling solution in cases where the existing factory structure cannot bear the wheel loads of an overhead cranes. Interlift offers gantry cranes in Single Girder and Double Girder configurations depending on the requirement. These cranes can be completely customized for SWL, span, lifting height, speeds and class of duty depending on the application.

Double Girder

Double girder Gantry crane is suitable for outdoor warehouse, yards and port terminals to lift materials.

  • Overload protective device to prevent hoisting of loads exceeding its rated capacity.
  • Limit switch to prevent overhoisting and overlowering.
  • 2 step Limit switch to prevent overtransversing.
  • 2 step Limit switch to prevent overtravelling.

Single Girder

Single girder Gantry crane is a regular crane widely used at open ground and warehouse for loading and unloading materials.

  • Overload protective device to prevent hoisting of loads exceeding its rated capacity.
  • Limit switch to prevent overhoisting and overlowering.
  • 2 step Limit switch to prevent overtransversing.
  • 2 step Limit switch to prevent overtravelling.

SEMI GANTRY CRANE

A semi Gantry Single/Double Girder crane is used in applications such as a tool room where part utilization of the bay is required, or in outdoor sites where a gantry rail can be installed on the side of an existing structure.

Features:

  • Overload protective device to prevent hoisting of loads exceeding its rated capacity
  • Limit switch to prevent overhoisting and overlowering
  • 2 step Limit switch to prevent overtransversing
  • 2 step Limit switch to prevent overtravelling
  • Safety catch on the hook
  • audible signalling device which activates when the crane moves
  • rotating light which activates when the crane moves
  • Flexible flat cable festoon system for cross travel power supply
  • Flexible flat cable festoon system for mobile control along the crane bridge
  • Push buttons pendant complete with control cable and moveable terminal box
  • Access cat ladder

Optional:

  • Antisway
  • Under voltage and over current protection
  • 4 no’s of sensor use at four corner of gantry crane to sensing human or  object
  • Phase loss detection relay include to cut-off main contactor when any one phase failure
  • Handrailings across the span on both girders
  • Access cat ladder
  • maintenance platform
  • Wireless Remote controller

 

 

 

A-FRAME PORTAL CRANE

A-frame gantry cranes, also known as A-frame cranes or light duty gantry cranes, suitable for a range of applications. Typically these are small gantry cranes for lighter duty lifting requirements. With the heavy duty castor wheels, the crane can be effortlessly moved around the work place and locked in place when required. These cranes are ideal for assembly lines, workshops, service bays and temporary locations.

 

Features:

  • Swivel castors with wheel brakes
  • Overload protective device
  • Limit switch to prevent overhoisting and overlowering
  • Safety catch on the hook
  • IP 54 protection for all motors
  • Push button pendant complete with control cable
  • Flexible flat festoon cable system for cross travel power supply
Download Catalogue

Send Us An Enquiry

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed commodo sit amet mauris non ultrices. Etiam sed interdum ipsum.
  • This field is for validation purposes and should be left unchanged.